PRODUCT

Similar to galvanized steel, Galvalume is produced by a hot-dip process. Instead of 100% zinc, the dip is 55% aluminum, 43.5% zinc and 1.5% silicon. Galvalume Steel Coil have excellent performance, possessing ideal comprehensive properties of corrosion resistance, formation and coating.

Galvanized pipe, also known as galvanized steel pipe, is divided into hot-dip galvanizing and electro-galvanizing. Hot-dip galvanizing has a thick galvanized layer, uniform coating, strong adhesion, and long service life. Electro-galvanizing has low cost, but the surface is not very smooth, and its corrosion resistance is much worse than that of hot-dip galvanized pipe.

Stainless steel bars are widely used in industrial pipelines and mechanical structures in the fields of petroleum, chemical industry, medical treatment, food, light industry, mechanical instruments, etc. They are widely used in the manufacture of mechanical parts and engineering structures. They are also commonly used in furniture and kitchen utensils.

Steel  coils are classified according to their professional uses, including oil drum plates, bulletproof plates, shipbuilding plates, automobile plates, construction plates, machining plates, etc. Specializing in the production and sales of carbon steel coils, factory direct sales, product grades and specifications are complete, and can certainly meet your various needs, welcome to consult

Angle steel, commonly known as angle iron, is a long strip of steel with two sides perpendicular to each other. Angle steel can be composed of different force components according to the different needs of the structure, and can also be used as a connector between components.

The carbon steel plate is usually used in the quenched and tempered state. When the carbon content is at the lower limit, the steel can also be used as the carburized steel with higher central strength.

Stainless steel plate has a smooth surface, high plasticity, toughness and mechanical strength, and is resistant to corrosion by acid, alkaline gas, solution and other media. It is an alloy steel that is not easy to rust, but it is not absolutely rust-proof. Stainless steel plate refers to steel plate that is resistant to corrosion by weak media such as atmosphere, steam and water, while acid-resistant steel plate refers to steel plate that is resistant to corrosion by chemically corrosive media such as acid, alkali and salt.

The products are classified into six grades—FeMo70, FeMo60-A, FeMo60-B, FeMo60-C, FeMo55-A, and FeMo55-B—based on varying Mo and Si contents.

The products are classified into six grades—FeMo70, FeMo60-A, FeMo60-B, FeMo60-C, FeMo55-A, and FeMo55-B—based on varying Mo and Si contents.

The products are classified into six grades—FeMo70, FeMo60-A, FeMo60-B, FeMo60-C, FeMo55-A, and FeMo55-B—based on varying Mo and Si contents.

Steel sheet pile is a type of steel with a locking mouth, which has sections such as straight plate, groove, and Z-shaped, and various sizes and interlocking forms. Common ones include Larsson style, Lakawana style, and so on. Its advantages are: high strength, easy to penetrate into hard soil layers; Construction can be carried out in deep water, and if necessary, inclined supports can be added to form a cage. Good waterproof performance; It can form various shapes of cofferdams as needed and can be reused multiple times, making it widely used. 

Steel sheet pile is a type of steel with a locking mouth, which has sections such as straight plate, groove, and Z-shaped, and various sizes and interlocking forms. Common ones include Larsson style, Lakawana style, and so on. Its advantages are: high strength, easy to penetrate into hard soil layers; Construction can be carried out in deep water, and if necessary, inclined supports can be added to form a cage. Good waterproof performance; It can form various shapes of cofferdams as needed and can be reused multiple times, making it widely used. 

Steel sheet pile is a type of steel with a locking mouth, which has sections such as straight plate, groove, and Z-shaped, and various sizes and interlocking forms. Common ones include Larsson style, Lakawana style, and so on. Its advantages are: high strength, easy to penetrate into hard soil layers; Construction can be carried out in deep water, and if necessary, inclined supports can be added to form a cage. Good waterproof performance; It can form various shapes of cofferdams as needed and can be reused multiple times, making it widely used. 

The coating composition of galvalume corrugated roofing sheets is composed of 55% aluminum, 43.4% zinc, and 1.6% silicon, respectively by weight. The production process of galvalume sheet is similar to that of galvanized sheet and aluminized sheet, which is a continuous molten coating process. When exposed to the same environment on both sides of the 55% aluminum-zinc alloy coated aluminum-zinc sheet, it has better corrosion resistance than galvanized steel sheet of the same thickness. The 55% aluminum-zinc alloy coated aluminum-zinc steel sheet not only has good corrosion resistance, but also the color-coated products have excellent adhesion and flexibility.

The coating composition of galvalume corrugated roofing sheets is composed of 55% aluminum, 43.4% zinc, and 1.6% silicon, respectively by weight. The production process of galvalume sheet is similar to that of galvanized sheet and aluminized sheet, which is a continuous molten coating process. When exposed to the same environment on both sides of the 55% aluminum-zinc alloy coated aluminum-zinc sheet, it has better corrosion resistance than galvanized steel sheet of the same thickness. The 55% aluminum-zinc alloy coated aluminum-zinc steel sheet not only has good corrosion resistance, but also the color-coated products have excellent adhesion and flexibility.

The coating composition of galvalume corrugated roofing sheets is composed of 55% aluminum, 43.4% zinc, and 1.6% silicon, respectively by weight. The production process of galvalume sheet is similar to that of galvanized sheet and aluminized sheet, which is a continuous molten coating process. When exposed to the same environment on both sides of the 55% aluminum-zinc alloy coated aluminum-zinc sheet, it has better corrosion resistance than galvanized steel sheet of the same thickness. The 55% aluminum-zinc alloy coated aluminum-zinc steel sheet not only has good corrosion resistance, but also the color-coated products have excellent adhesion and flexibility.

Galvanized corrugated sheet is a profiled sheet made of galvanized sheets that are rolled and cold-bent into various wave shapes. It is a metal material, the surface is coated with zinc, which has good anti-rust, corrosion resistance, and durability. Widely used in construction, manufacturing, automobile, aviation and other fields.
Different minimum order quantities lead to different product prices
If you need it, please click below to get a free quote

Galvanized corrugated sheet is a profiled sheet made of galvanized sheets that are rolled and cold-bent into various wave shapes. It is a metal material, the surface is coated with zinc, which has good anti-rust, corrosion resistance, and durability. Widely used in construction, manufacturing, automobile, aviation and other fields.
Different minimum order quantities lead to different product prices
If you need it, please click below to get a free quote

Galvanized corrugated sheet is a profiled sheet made of galvanized sheets that are rolled and cold-bent into various wave shapes. It is a metal material, the surface is coated with zinc, which has good anti-rust, corrosion resistance, and durability. Widely used in construction, manufacturing, automobile, aviation and other fields.
Different minimum order quantities lead to different product prices
If you need it, please click below to get a free quote

Carbon steel square tubing is widely used in many industries. Firstly, it plays a vital role in construction and building engineering. As a major component of the building's framework, carbon steel square tubing bears the pressure of important structures such as stairs, railings, beams, and columns. Its rigidity and stability make buildings stronger and more durable.

Carbon steel square tubing is widely used in many industries. Firstly, it plays a vital role in construction and building engineering. As a major component of the building's framework, carbon steel square tubing bears the pressure of important structures such as stairs, railings, beams, and columns. Its rigidity and stability make buildings stronger and more durable.

Carbon steel square tubing is widely used in many industries. Firstly, it plays a vital role in construction and building engineering. As a major component of the building's framework, carbon steel square tubing bears the pressure of important structures such as stairs, railings, beams, and columns. Its rigidity and stability make buildings stronger and more durable.

Electrical steel, generally referring to cold-rolled electrical steel, can be divided into two main categories: oriented electrical steel and non-oriented electrical steel. Oriented electrical steel has its easy magnetization direction parallel to the rolling direction, exhibiting excellent magnetic properties in this direction, including low iron loss, high permeability, and low magnetostriction, and is widely used in the transformer industry.

Electrical steel, generally referring to cold-rolled electrical steel, can be divided into two main categories: oriented electrical steel and non-oriented electrical steel. Oriented electrical steel has its easy magnetization direction parallel to the rolling direction, exhibiting excellent magnetic properties in this direction, including low iron loss, high permeability, and low magnetostriction, and is widely used in the transformer industry.

Electrical steel, generally referring to cold-rolled electrical steel, can be divided into two main categories: oriented electrical steel and non-oriented electrical steel. Oriented electrical steel has its easy magnetization direction parallel to the rolling direction, exhibiting excellent magnetic properties in this direction, including low iron loss, high permeability, and low magnetostriction, and is widely used in the transformer industry.

Non-oriented silicon steel is a silicon-iron alloy with very low carbon content. Its grains exhibit an irregular orientation distribution after deformation and annealing.

The silicon content of the alloy is typically 1.5%–3.0%, or the combined silicon and aluminum content is 1.8%–4.0%.
It mainly exists in the form of cold-rolled sheets or strips, with nominal thicknesses mostly between 0.35 mm and 0.5 mm.
This material is primarily used to manufacture the cores of electric motors, generators, and other equipment. Because its magnetic direction is not particularly biased, it is suitable for applications requiring multi-directional magnetization.

Non-oriented silicon steel is a silicon-iron alloy with very low carbon content. Its grains exhibit an irregular orientation distribution after deformation and annealing.

The silicon content of the alloy is typically 1.5%–3.0%, or the combined silicon and aluminum content is 1.8%–4.0%.
It mainly exists in the form of cold-rolled sheets or strips, with nominal thicknesses mostly between 0.35 mm and 0.5 mm.
This material is primarily used to manufacture the cores of electric motors, generators, and other equipment. Because its magnetic direction is not particularly biased, it is suitable for applications requiring multi-directional magnetization.